Note:
The air supplied to the 800
series tools should be dry and free of contamination to prevent
premature wear and tear of the internal components. We suggest
use of a filter, pressure regulator, and oiler system, which are
available through Atlas, to be located in close proximity to the
tool. ALl available thread sizes may not be listed. Contact PennEngineering
Fastening Technologies for availability. Optional mandrel lengths
are also available for all product families
PREVENTATIVE
MAINTENANCE REQUIREMENTS: The bearing set must be
kept in a well lubricated condition to assure proper tool operation.
We suggest the use of a high temperature bearing rease such as
sSUPER BLUE 442. The tool mandrel should be periodically inspected
for thread wear and damage. When the fastener will no longer thread
onto the mandrel freely from the shank end, the mandrel is worn
and needs to be replaced. WE crecommend using UNBRAKO, BLUE DEVIL
or HOLO-KROME brand socket head cap screws. Last dash number in
part number denotes length, example: -150 is 1.5" in length.
|
