PEM Logo PEMSERTER Logo Atlas Logo 3V Logo QRP Logo SI Logo StickScrew Logo French Flag German Flag Chinese Flag Spanish Flag

Recently Released Products
 


Heat Sink Mounting Fastener System

            HSCB

Specifications/CAD PDF Part Number Designation
  • Screw and spring mount together permanently into the heat sink.
  • Receptacle nut mounts permanently to the PC board.
  • Scew can not be overtightened.
  • Provides even, constant contact of heat sink to chip component.
  • Allows removal of heat sink if desired.
  • RoHS compliant.

microPEM™ ReelFast® Surface Mount Fasteners

      micro SMTSO

 

Specifications/CAD PDF Part Number Designation
  • Hex shaped barrel provides larger solder area.
  • Provided on tape and reel.
    Reduces board handling.
  • Smallest thread size: M1 / #0-80.
  • Minimum sheet thickness 0.5 mm / .020."
  • RoHS compliant.


T™ Micro TackPin Fasteners

      TackPin

 

Specifications/CAD PDF Part Number Designation Animation
  • Micro sized for fastening within very compact designs.
  • Attaches top sheets as thin as 0.2 mm / .008".
  • Clinches into base panels as hard as HRB 45 / HB 84.
  • Interference fit minimizes hole tolerance issues.
  • Tapered tip assists location.
  • Low profile head provides cosmetic benefits.
  • Replaces screws: eliminating costly tapping, cross threading, torque control, vibration backout and installation time.

PF7M™ / PF7MF™ Captive Panel Screws

      TackPin

 

Specifications/CAD PDF Part Number Designation
  • Small, compact and low-profile design for limited access areas.
  • MAThread® anti cross-thread feature.
  • Phillips recess for tool or hand operation.
  • Available in two mounting styles, self-clinching (type PF7M) or flaring (type PF7MF).
  • Shoulder on retainer to provide a positive stop during installation.
  • Available in two screw lengths.

SGPC™ Swaging Collar Studs

          SGPC

 

Specifications/CAD PDF Part Number Designation
  • Installs into sheets as thin as .024" / 0.6mm.
  • Can be installed into dissimilar materials and/or multiple panels.
  • Allows for close centerline-to-edge distance.
  • Installed into most panel material, including stainless steel
  • Corrosion resistant.
  • RoHS compliant.

SCBR™ Spinning Clinch Bolts

      SCBR

Specifications/CAD PDF Part Number Designation
  • Permanently captivates into sheets as thin as .040" / 1.02 mm.
  • Spring keeps screw retracted when disengaged.
  • Provides economical self-retracting captive screw.
  • Replaces loose hardware.
  • Allows for close centerline-to-edge distance.

 



Home | Contact Us | Company News | Channel Partners | Suppliers      
Copyright ©2000 - 2011, PennEngineering • Terms of Use • Questions, comments or problems should be directed to the webadmin