Studs And Pins For Sheetmetal

Concealed Head - Types CFHA, CFHC, CHA, CHC PEM self-clinching concealed-head studs install permanently in steel or aluminum sheets as this as .062" / 1.6mm to provide strong and reusable threads for mating hardware in a wide range of thin-metal assembly applications. Part Number Explanation Key Specifications / CAD                                   Download Bulletin CH Flush-Head - Types FH, FH4, FHA, FHP, FHS Available in steel, aluminum and stainless steel, PEM standard flush-head studs are designed to be installed in sheets as thin as .040" / 1 mm. Part Number Explanation Key  Specifications / CAD                                  View Animation                                          Download Bulletin FH Flush-Head, Low Displacement - Types FHL, FHLS Flush, low-displacement head studs install closer to the edge of a sheet than PEM Types FH/FHS studs without causing that edge to bulge. Part Number Explanation Key Specifications / CAD     View Installation                                          Download Bulletin FH  Heavy Duty, Non Flush - Types HFH, HFHB, HFE, HFHS Heavy Duty studs are designed with an enlarged head diameter which projects above the sheet metal and provides maximum pull through in sheets as thin as .040" / 1mm Part Number Explanation Key Specifications / CAD View Animation                                           Download Bulletin FH High Tensile Strength, Non Flush - Types HF109, HFG8 Heavy duty high tensile strength studs are manufactured for the most demanding applications from medium carbon alloy steel, then heat-treated to high strength and hardness qualities. Part Number Explanation Key Specifications / CAD View Animation                                           Download Bulletin FH Thin Sheet, Non Flush - Types TFH, TFHS Thin sheet studs are for sheets as thin as .020 inches / 0.51 mm. They may also be used in thicker sheets where flush head studs are not required. TFH studs are installed in the sheets in the same manner as flush-head studs; however different punches and anvils are required. Part Number Explanation Key Specifications / CAD                                   Download Bulletin FH Unthreaded, Flush - Types TP4, TPS, TPXS Flush-head pilot pins satisfy a wide range of positioning, pivot, and alignment applications. The chamfered end makes mating hole location easy. Part Number Explanation Key Specifications / CAD View Installation                                         Download Bulletin FH Installs Into Stainless - Types FH4, FHP, TP4 One of the very basics of self-clinching is that the fastener must always be harder than the host sheet to ensure proper and permanent installation. Threaded types FH4, FHP and unthreaded type TP4 are specifically designed for installation into stainless steel sheets as thin as .040'" / 1 mm. Part Number Explanation Key Specifications / CAD                                  Download Bulletin FH Micro, Self-Clinching - Type MPP™ Type MPP, self-clinching micro pins are ideal for today's compact electronic assemblies. They can be installed into a variety of sheet materials up to HRB 92 / HB 195 in hardness and they offer excellent corrosion resistance. Part Number Explanation Key Specifications / CAD                                Download Bulletin MPP Swaging Collar Studs, Non Flush - Type SGPC™ Type SGPC swaging collar studs can be installed into most panel material, provide strong torque-out resistance and are suitable for close centerline-to-edge situations. These studs can also accomodate multiple panels as long as the total thickness does not exceed the maximum sheet thickness. Part Number Explanation Key Specifications / CAD                              Download Bulletin SGPC